Deep Hole Drilling Tools

Indexable Drill

Indexables

EDGE provides indexables from 2.000” dia. to 20.000″+ dia. with cartridges for extra protection for the tool. There are many combinations in which the cartridge and wear pad can be used to produce additional plus hole sizes.All Indexable drills are shipped with assembly instructions, including a list of spare parts.

CoroDrill 800 drilling

Sandvik-style Drill

EDGE provides a direct fit indexable tool. The Drill is designed for the inserts to fit directly in the drill pocket meaning there are no cartridges in this drill. Many customers prefer this style drill in smaller diameter drilling because it provides for better chip evacuation. The inserts for this tool are interchangeable with the Corodrill 800 Sandvik-style Indexable that are still in use. This tool is available for Single Tube and Double Tube Systems. The drill is available in our style or Sandvik-style guide pads. This drill is available in 0.984”dia to 2.559”dia.

Drilling Inserts

Inserts

Special Chip Breakers available for difficult-to-cut materials. Performs exceptionally well in Inconel, Stainless, 13 Chrome, P550, 4145, and many other materials.

CLICK HERE TO VIEW OUR INSERTS
Drilling Cartridge

Cartridges

Cartridges (left and right hand) available in the following sizes:

Inner/Center Cartridge
EDGE-IOZ-402-04-RIGHT
EDGE-IOZ-402-32-RIGHT
EDGE-IOZ-402-43-RIGHT
EDGE-IOZ-402-63-RIGHT

EDGE-IOZ-402-04-LEFT
EDGE-IOZ-402-32-LEFT
EDGE-IOZ-402-43-LEFT
EDGE-IOZ-402-63-LEFT

Outer Cartridge
EDGE-OZ-402-04-RIGHT
EDGE-OZ-402-32-RIGHT
EDGE-OZ-402-43-RIGHT
EDGE-OZ-402-63-RIGHT

EDGE-OZ-402-04-LEFT
EDGE-OZ-402-32-LEFT
EDGE-OZ-402-43-LEFT
EDGE-OZ-402-63-LEFT

Intermediate, Center, Outer Cartridges in stock. Cartridges ship complete with Insert Screws and Adjust Screws.

Drilling Guide Pads

Guide Pads

Brazed and Solid Carbide Guide Pads available for Solid Drill Indexables and Trepan Tools. Additional sizes available upon request.

CLICK HERE TO VIEW OUR GUIDE PADS

Sandvik-Style Wear Pads & Cartridges

Sandvik style Wear Pads
Available for fast delivery:

EDGE 430.32-12D63.5
EDGE 430.32-12D65.0
EDGE 430.32-12D70.0

EDGE 430.32-12D75.0
EDGE 430.32-12D80.0
EDGE 430.32-12D85.0

EDGE 430.32-12D90.0
EDGE 430.32-12D95.0

EDGE 430.32-16D100.0

EDGE 430.32-16D105.0

EDGE 430.32-16D110.0

EDGE 430.32-16D120.0

EDGE 430.32-16D130.0

EDGE 430.32-16D140.0

EDGE 430.32-16D150.0

EDGE 430.32-16D160.0

 

EDGE 430.21-12D65.0

EDGE 430.21-12D70.0

EDGE 430.21-12D75.0

EDGE 430.21-12D80.0

EDGE 430.21-12D85.0

EDGE 430.21-12D90.0

EDGE 430.21-12D95.0
EDGE 430.21-16D100.0

EDGE 430.21-16D105.0
EDGE 430.21-16D110.0

EDGE 430.21-16D115.0

EDGE 430.21-16D120.0
EDGE 430.21-16D125.0
EDGE 430.21-16D130.0

EDGE 430.21-16D140.0

EDGE 430.21-16D150.0


Sandvik style Cartridges
stocked and ready to ship:


EDGE R430.21-1516-16
EDGE R430.21-1822-22

EDGE R430.26-1114-06
EDGE R430.26-1216-16
EDGE R430.26-1522-22

EDGE R430.28-1516-16
EDGE R430.28-1822-22
EDGE R430.28-1822-22S

EDGE R430.30-1216-16
EDGE R430.30-1522-22

EDGE L430.27-1216-16
EDGE L430.27-1522-22

EDGE L430.31-1216-16
EDGE L430.31-1522-22

Brazed Heads Drilling

Brazed Heads / New & Retipped

BTA / STS Brazed Heads for the Single Tube System have a Drill Size range of: 0.312″ – 2.559″

Ejector / DTS Brazed Heads for the Double Tube System have a Drill Size range of: 0.724″ – 2.559″

Several grades of Carbide are available for various materials.

Our Brazed Heads can be modified by using extra long guide pads for drilling long parts, especially for small drill sizes.

If you have brazed heads to be retipped, we offer 1-2 week delivery. All tools retipped here in the U.S.

Pull Boring Tool

Pull Boring Tools

Pull Boring tools are designed to be pulled back by the drill tube through an existing bore in order to enlarge the hole as well as to enhance the straightness of the bore. The tool is “on tension”. Push style Counterboring/Reaming tools are also available.

Special Form Tool

Special Form Tools

Special Form Drills and Boring Heads are manufactured for specific customer requirements. We have manufactured these tools for diverse industries such as Aerospace, Automotive Steering, Transmission, Aircraft Landing Gear, Power Generation, Tube Sheet, Mold Industry, Oil and Gas, and Valve Manufacturing.

These tools can be manufactured with a Special Radii, Angle, Special Form, Flat Bottom, and other designs.

Trepan Head

Trepan Heads

Trepan Heads are designed to drill a hole in the workpiece while also leaving a smaller solid core of material that can be used to machine other products. Trepan Heads can be designed to meet the core specifications needed. Trepan Heads can be manufactured up to 20″ or more in diameter.